Sale

TRB 20L transporter cart.

(with VAT)

21.07.2026

10 шт

Description

TRB 20L BALE PICK-UP AND TRANSPORTER AVAILABLE It is designed to pick up bales in the field, transport them to the storage place and unload, thus replacing three different units. The transporter is designed to withstand harsh environments. In Stock Delivery to the farm Warranty and service support.

Characteristics

Gluten 0

Batch, tons 10

Similar ads

Sale

Updated 07.07.2026 KH ALDAZHAR.

You are selling a two-beam mower.

Updated: 07.07.2026

Sale

Updated 21.07.2026 Baler RB15/2000.

The RB15/2000 baler is designed for picking up and pressing grass clips of any moisture content from swaths or sweeps into cylindrical bales with high pressing density. The coil is tied with polypropylene twine or a special net. The two-metre pick-up width makes it easy to pick up wide swaths at higher speeds without having to constantly look back. The mesh strapping control panel has two modes: manual and automatic. With automatic control, the strapping time is optimized, which leads to an increase in the productivity of the unit. The upgraded ejector allows you to unload bales without feeding the unit backwards, which also increases the productivity of the unit. KEY BENEFITS It presses any mass regardless of humidity (haylage, silage, hay from annual and perennial grasses, as well as straw and flax for tow) High performance A powerful gearbox and a reinforced final drive are installed, which significantly increase the service life High pressing density Fully adapted to Russian operating conditions Working width 2 m (can work after the self-propelled mower) Spring-loaded conveyor tensioner Transporter speed increased by 15% Upgraded heavy-duty stacker Direct pick-up drive Control of the strapping material supply in automatic and manual modes Ergonomics: convenient remote control, automation Ejector.

Updated: 21.07.2026

Sale

Updated 21.07.2026 Baler JB12/2000.

The JB12/2000 baler is designed for picking up and pressing dry grass crop from swaths or swathes into cylindrical rolls with high pressing density. The coil is tied with polypropylene twine. The pick-up working width of 2 m allows you to pick up wide swaths without hammering; A chain-slatted conveyor with heavy-duty chains and spring steel slats ensures tight baling of the coil; Closed type pressing chamber eliminates the loss of pressed material; Modernized reinforced stacker, uninterrupted supply of pressed material from the pick-up to the pressing chamber; Friction safety clutches on the pick-up drive, conveyor and propeller shaft protect the machine's mechanisms from critical overloads; Control of the supply of strapping material in automatic and manual modes; Electronic system with visual and audible chamber filling alarm;

Updated: 21.07.2026

Sale

Updated 09.02.2026 GKP-3,3-N-7 Mounted wheel-pin rake.

Aggregation method: Mounted Tractor traction class: from 0.6 tf Working width (raking): 3300 mm Working width (tedding): 4700 mm Tine Arm Diameter: 7mm Number of impellers: 5 Weight: 182 kg Description The PWR 5 rake has a wide angle of attack adjustment and traditionally high structural strength. The rake is installed on the rear linkage of the tractor, the transfer of the machine from the working position to the transport position and vice versa is carried out by the operator. They are aggregated with tractors of traction class tractors from 0.6 tf. domestic and imported production. Number of tine arms per wheel 40 pcs.

Updated: 09.02.2026