Equipment for grain processing and storage
Total offers 48
Line for cleaning grain and leguminous crops. Capacity: 8-10 tons/hour Total power: 24.5 kW Machine dimensions: 8700*2440*3500 mm Net weight: 3500 kg Line composition: A: Vertical air unit B: Gravity separator C: Vibrating separator The set includes nets for the following types of raw materials: Cereals For wheat For corn For rice Sunflower seeds Flax seeds Rapeseed seeds Mustard seeds Oats Barley Price 16.3 million tenge, delivery across Kazakhstan 50/50! Daniyal! Astana.
Line for cleaning grain and leguminous crops. Capacity: 8-10 tons/hour Total power: 24.5 kW Machine dimensions: 8700*2440*3500 mm Net weight: 3500 cc Line composition: A: Vertical air unit B: Gravity separator C: Vibrating separator The set includes nets for the following types of raw materials: Cereals For wheat For corn For rice Sunflower seeds Flax seeds Rapeseed seeds Mustard seeds Oats Barley.
Line for cleaning grain and leguminous crops. Capacity: 8-10 tons/hour Total power: 24.5 kW Machine dimensions: 8700*2440*3500 mm Net weight: 3500 cc Line composition: A: Vertical air unit B: Gravity separator C: Vibrating separator The set includes nets for the following types of raw materials: Cereals For wheat For corn For rice Sunflower seeds Flax seeds Rapeseed seeds Mustard seeds Oats Barley.
We offer soft multi-use containers MMK-14, designed for transporting and storing bulk cargo (mineral fertilizers, cement, grain, sulfur, wood pellets, etc.). The cargo volume in the container is up to 14 m3, with a load capacity of ≥14 tons. With proper use, the container's turnover can reach ≥200 cycles (if the operating instructions are followed).
The arches are made of profiled pipe 60x40x3 mm. Sections - 5 pcs.
Arches are made of profiled pipe 60x40x2 mm. Sections - 4 pcs.
TS – 25/50/100 SCRAPER CONVEYORS It is designed for horizontal and inclined transportation of bulk material (spiked, cereals, legumes, industrial and oilseeds, grass seeds). SPECIFICATIONS Working length: m 1.5 – 15 Maximum capacity*: t/h 25/50/100 Installed power: kW 0.75 – 7.5 * productivity on wheat with a weight of raw material not less than 760 g/l BENEFITS • Using a recoilless worm geared motor, with high torque, and high smoothness. • The location of the geared motor along the longitudinal axis reduces the dimensions and reduces the load on the drive mounting points. • Standard bearing units in drive mechanisms. • Electric motors manufactured by leading enterprises of the Russian Federation and the Republic of Belarus (full compliance with GOST 31606-2012) • Mandatory preliminary priming with a special primer GF-021 (GOST 25129-82) • Painting with automotive enamel ML-12 (GOST 9754-76).
GALVANIZED BUCKET ELEVATORS Designed for vertical transportation of bulk material (spiked, cereals, legumes, industrial and oilseeds, grass seeds). SPECIFICATIONS Working height: m 4 – 25 Maximum capacity: t/h 25/50/100* Drive: Worm gear motor Operating Voltage: V 380 Installed power: kW 2.2 – 15 Section height: mm 1000/2000 Belt width: mm 175/200/300 Bucket parameters (metal): - width, mm 160/180/270 - Reach, mm 125/130/155 - height, mm 110/115/155 Drive drum speed: rpm 125-145 Linear belt velocity: m/s 2.8 – 3.5 Bucket pitch on belt: 250/230/250 mm * productivity on wheat with a weight of raw material not less than 760 g/l BENEFITS The use of a recoilless worm geared motor, with high torque, and high smoothness. The location of the geared motor along the vertical axis reduces the dimensions and reduces the load on the attachment points of the drive and the entire upper head of the elevator. Possibility of using metal and polymer buckets. Optional automation equipment. Optional magnetic catchers in the lower shoe. Optional motorized dampers and flow dividers. Use of high-quality domestic 4-6 layer (depending on performance and height) tape BKNL-65 (GOST 23831-79). Standard bearing units in drive mechanisms. Collapsible sections, head and lower shoe on bolted connections. The elevator is completely made of galvanized steel (GOST 14918-80) for with the exception of drive drums, shafts, tensioning units and the platform of the motor- gearbox..
Mechtok-constructor "SamTok" from Saragrostroy LLC. Frame + Instructions for welders Why overpay local construction companies for the installation of mechtok? Assemble it on your own and leave millions of tenge in the budget of the farm! Saragrostroy LLC (Saratov) has been professionally building turnkey mechtoks in the Saratov and adjacent regions for 10 years. We have invested all our many years of experience in a finished product - the SamTok mechtok constructor for self-assembly. We deliver a ready-made set of metal structures directly to any region of Kazakhstan by a separate Euro truck (metal occupies the entire car). We work officially within the framework of the EAEU - we provide a full package of documents for farms. What's the trick? We have developed drawings and step-by-step instructions so that ordinary ordinary welders on your farm can assemble mechtok on the first try. Construction according to our scheme (buy metal from us ➡️, buy a general building on the spot ➡️, weld it on your own) is several times cheaper than ordering turnkey construction from local companies in Kazakhstan. The drawings take into account all the critical nodes that usually become a "pain" for farmers: Ideal dump pit: Designed for dimensions of 8 m by 5 m. Powerful volume: The pit holds 60 m³ - a loaded KamAZ with a trailer "enters" the whole under one drop! Correct geometry: Precise angles of inclination of the pit walls and precise tight connection to the elevator. The grain does not get stuck and does not rot. 🧱 What is included in the "SamTok" kit for 18,700,000 tenge: You get a complete factory-made mechtok load-bearing frame (all elements are cut to size and fully primed with a protective compound GF-021 to protect against rust): 2 hoppers (4.2 x 4.2 m): The volume of each is 32 m³, the thickness of the sheet metal is 3 mm. Reliable mechtok racks: A profile square pipe 140x140x5 is a powerful supporting skeleton. Wall and roof frame: Profile pipe 80x80x3. Passage under the car: Construction of 6 I-beams No 25 (will withstand any loaded KamAZ or Chinese dump truck). Canopy over the dump pit: Racks 80x80x3, trusses made of pipes 60x40x3 and 80x40x3. Elevator tower: Rigid structure made of a profile pipe 80x80x3. Safe ladder: Channel 16, steps made of angle and non-slip expanded metal sheet (PVL). Accessories: Slide gate valves for hoppers with manual drive and all necessary embedded parts. Documentation: Detailed drawings and instructions developed by engineers "for people". 🛠 What you buy on the spot (about 12,000,000 tenge): To start the complex, you will have to buy standard general construction materials according to our exact specification: Rolled metal for the dump pit (frame, sheet, reinforcing grid). Lumber for wooden floors, profiled sheet, windows and electrics. Gravity for grain distribution. ⚠️ Grain cleaning equipment: The bucket elevator and the machine are not included in this set and will not fit in one truck with metal. But we can separately offer, professionally select and deliver to your farm reliable grain cleaning machines: OVS-25, OZF-50, OZF-80 or MUZ-16. 🎯 Why farmers in Kazakhstan choose Saragrostroy LLC: 10 years of experience in the construction of ZAV Answer: We know every node. The design has been tested over the years and steppe winds. Unloading without downtime: A huge 60 m³ intake pit allows.
Mechtok-constructor "SamTok" from Saragrostroy LLC. Frame + Instructions for welders Why overpay local construction companies for the installation of mechtok? Assemble it on your own and leave millions of tenge in the budget of the farm! Saragrostroy LLC (Saratov) has been professionally building turnkey mechtoks in the Saratov and adjacent regions for 10 years. We have invested all our many years of experience in a finished product - the SamTok mechtok constructor for self-assembly. We deliver a ready-made set of metal structures directly to any region of Kazakhstan by a separate Euro truck (metal occupies the entire car). We work officially within the framework of the EAEU - we provide a full package of documents for farms. What's the trick? We have developed drawings and step-by-step instructions so that ordinary ordinary welders on your farm can assemble mechtok on the first try. Construction according to our scheme (buy metal from us ➡️, buy a general building on the spot ➡️, weld it on your own) is several times cheaper than ordering turnkey construction from local companies in Kazakhstan. The drawings take into account all the critical nodes that usually become a "pain" for farmers: Ideal dump pit: Designed for dimensions of 8 m by 5 m. Powerful volume: The pit holds 60 m³ - a loaded KamAZ with a trailer "enters" the whole under one drop! Correct geometry: Precise angles of inclination of the pit walls and precise tight connection to the elevator. The grain does not get stuck and does not rot. 🧱 What is included in the "SamTok" kit for 18,700,000 tenge: You get a complete factory-made mechtok load-bearing frame (all elements are cut to size and fully primed with a protective compound GF-021 to protect against rust): 2 hoppers (4.2 x 4.2 m): The volume of each is 32 m³, the thickness of the sheet metal is 3 mm. Reliable mechtok racks: A profile square pipe 140x140x5 is a powerful supporting skeleton. Wall and roof frame: Profile pipe 80x80x3. Passage under the car: Construction of 6 I-beams No 25 (will withstand any loaded KamAZ or Chinese dump truck). Canopy over the dump pit: Racks 80x80x3, trusses made of pipes 60x40x3 and 80x40x3. Elevator tower: Rigid structure made of a profile pipe 80x80x3. Safe ladder: Channel 16, steps made of angle and non-slip expanded metal sheet (PVL). Accessories: Slide gate valves for hoppers with manual drive and all necessary embedded parts. Documentation: Detailed drawings and instructions developed by engineers "for people". 🛠 What you buy on the spot (about 12,000,000 tenge): To start the complex, you will have to buy standard general construction materials according to our exact specification: Rolled metal for the dump pit (frame, sheet, reinforcing grid). Lumber for wooden floors, profiled sheet, windows and electrics. Gravity for grain distribution. ⚠️ Grain cleaning equipment: The bucket elevator and the machine are not included in this set and will not fit in one truck with metal. But we can separately offer, professionally select and deliver to your farm reliable grain cleaning machines: OVS-25, OZF-50, OZF-80 or MUZ-16. 🎯 Why farmers in Kazakhstan choose Saragrostroy LLC: 10 years of experience in the construction of ZAV Answer: We know every node. The design has been tested over the years and steppe winds. Unloading without downtime: A huge 60 m³ intake pit allows.

