Tillage equipment Page 2
Total offers 27
Made in Kazakhstan Subsidies up to 30% 1) Configurations: single-row BZG-12, BZG-14, BZG-16, BZG-18, BZG-22, BZG-24 Working width (structural), m: 12 - 24; Number of working tools, pcs: 12 - 24; Transport speed, km/h: 15; Working speed, km/h: 10; Productivity, ha/h: 12 - 26. 2) Configurations: two-row BZG-12x2, BZG-14x2, BZG-16x2, BZG-18x2, BZG-22x2, BZG-24x2 Working width (structural), m: 12 - 24; Number of working tools, pcs: 24 - 48; Transport speed, km/h: 15; Working speed, km/h: 10; Productivity, ha/h: 12 - 26. The tooth harrow is designed for: - leveling the field surface; - early spring harrowing of the winter; - harrowing of winter crops; - incorporation of fertilizers into the soil. - Moisture closure during the pre-sowing harrowing period; - pre-sowing provocation and destruction of weed seedlings; - loosening the soil surface to a depth of 80 mm, depending on the density of the soil and the angle of attack of the teeth; - pre-emergence and post-emergence harrowing of industrial and grain crops; - destruction (grinding) and distribution of stubble, straw and plant residues over the field; - provocations of weeds and carrion after harvesting.
All-welded construction, working width 4 m., 11 working tools, rubber support wheels, double gear roller equipped with hydraulic equipment Purpose For loosening the soil on moldboard and non-moldboard backgrounds with deepening of the arable horizon, using non-moldboard technology instead of winter and spring plowing, especially where resource-saving technologies are used and industrial crops (sugar beet, corn, potatoes, etc.) are cultivated. By using subsoilers of the KAMA series for deep loosening of the compacted waterproof layer of soil, in order to decompact the plough sole without turning the layer and without damaging the stubble, you will ensure the improvement of the water-air regime of the root layer of the soil, prevent the development of soil erosion, moisture accumulation and increase the yield of crops. Working width 5m Number of racks 11pcs Processing depth 45cm Hydrave Roller Type It is aggregated with tractors 320-450 hp Equipment manufacturer: Technika-Agro LLC, Russian Federation. Supplier: AgroSpetsTechnika LLP, Kostanay, Kazakhstan. Year of release: 2026. Terms of delivery: RK, Delivery to the farm. Delivery time: In stock. Warranty period: 12 months from the date of commissioning.
Disc harrow "DISKOMASTER" is a 4-row disc tillage implement with the installation of each disc on an individual vertical rack with an inclination. Coverage width 6.2 m Capacity up to 6.5 ha/h Processing depth up to 14 cm Tractor power required 300 hp Number of working tools (disks) 62 pcs It is used for basic tillage for cereals, fodder and industrial crops. In one pass, it performs soil cultivation to a depth of 16 cm., crushing and embedding plant residues of the predecessor and weeds, creates a loosened layer of soil, and incorporates the applied fertilizers. The use of "DISKOMASTER" in tillage technology allows you to reduce the cost of cultivating crops, restore the humus layer, and increase soil fertility. Each processing disc is mounted on an individual rack in 4 rows and is inclined from the vertical axis. The inclination of the disc contributes to the self-cleaning of the disc. At the same time, the disc acts as a ploughshare and a blade, which contributes to a better rotation of the cut layer, its crumbling, and also reduces the required traction force of the tractor. The absence of a single axis of the discs reduces the winding of plant residues and the clogging of the implement. Each row of discs has the ability to separately adjust the angle of attack and, accordingly, the depth of processing. Individual suspension of the working discs simplifies maintenance and repair. Equipment manufacturer: PK Agromaster LLC, Russian Federation. Supplier: AgroSpetsTechnika LLP, Kostanay, Kazakhstan. Year of release: 2026. Terms of delivery: Kostanay. Delivery time: In stock. Warranty period: 12 months from the date of commissioning.
All-welded construction, working width 4 m., 9 working tools, rubber support wheels, double gear roller equipped with hydraulic equipment Purpose For loosening the soil on moldboard and non-moldboard backgrounds with deepening of the arable horizon, using non-moldboard technology instead of winter and spring plowing, especially where resource-saving technologies are used and industrial crops (sugar beet, corn, potatoes, etc.) are cultivated. By using subsoilers of the KAMA series for deep loosening of the compacted waterproof layer of soil, in order to decompact the plough sole without turning the layer and without damaging the stubble, you will ensure the improvement of the water-air regime of the root layer of the soil, prevent the development of soil erosion, moisture accumulation and increase the yield of crops. Working width 4m Number of racks 9pcs Processing depth 45cm Hydrave Roller Type Aggregated with tractors 280 - 350 hp Equipment manufacturer: Technika-Agro LLC, Russian Federation. Supplier: AgroSpetsTechnika LLP, Kostanay, Kazakhstan. Year of release: 2026. Terms of delivery: RK, Delivery to the farm. Delivery time: In stock. Warranty period: 12 months from the date of commissioning.
KPO compactor is designed for pre-sowing soil preparation - this tool meets all modern agronomic requirements for high-quality tillage.
Disc harrow is designed for the supply of equipment and implements.
I will sell Mammoth PZK -30, for primary processing from the field, can throw as a loader. Excellent car. I recommend ! The condition of the new . It was in operation for about a short time, as we bought another !!!.
Available in Kokshetau Artaius Plant Specifications Indicators step 300 step 260 Working width, m 3.2 3.2 Number of rows of discs 2 2 Productivity Ha/h 3.2 3.2 Working speed, km/h 8-12 8-12 Transport speed, km/h 20 20 Processing depth, cm 16 16 Angle of attack, deg. 0-30 0-30 Tractor power, hp 120 120 Disc diameter, mm 560 560 Number of implements 22 24 Distance m/u disks, mm 300 260 Distance m/u rows, mm 1000 1000 Weight, kg 1300 1350 Mounted disc harrows with a 2-row arrangement of working tools (disks) are designed for loosening and preparing the soil for sowing; destruction of weeds and shredding of crop residues; for pre-sowing soil preparation without preliminary plowing and tillage after harvesting thick-stemmed (in two passes) row crops. Independent row regulation of the angles of attack of the discs contributes to the improvement of agrotechnical indicators of tillage, as well as to reduce the required traction force of the tractor. At the same time, the disc acts as a ploughshare and a blade, which contributes to a better rotation of the cut layer, its crumbling, as well as a decrease in the traction force of the tractor. The absence of a single axis for several discs eliminates the winding of plant residues and eliminates the need to use peelers in the design. The harrow is designed to work on all soils with soil moisture not more than 28%, field surface slope not more than 10°, soil hardness in the cultivated layer not more than 3.5 MPa.
Available in Kokshetau Specifications Working width, m 6 Number of rows of discs 2 Productivity Ha/h 6 Working speed, km/h 8-12 Transport speed, km/h 20 Processing depth, cm 16 Angle of attack, deg. 0-30 Tractor power, hp 230 Disc diameter, mm 560 Number of implements 46 Distance m/u disks, mm 260 Distance m/u in rows, mm 1000 Weight, kg 3860 Trailed disc harrows are designed for loosening and preparing the soil for sowing; destruction of weeds and shredding of crop residues; for pre-sowing soil preparation without preliminary plowing and tillage after harvesting thick-stemmed row crops.
South Wind Plant The BMR-5.6 harrow is designed for continuous and inter-row cultivation of any crops: cereals, row crops, legumes, vegetables, etc. It is used to control weeds (at the thread stage), destroy the crust, loosen the surface of the field, saturate the soil with air, preserve moisture, and prepare the soil for sowing. The unit effectively and evenly loosens the soil without damaging the plants, has a high frame, which allows inter-row cultivation at a later time of the growing season. Capacity of the unit for 1 hour of the main time, ha/h up to 8.4 Operating speed, km/h up to 15 Working width, m 5.6 Processing depth, cm 5-6 Weight, kg 700±20 Overall dimensions in working position, mm - Length 950 - width 5700 - Height 1145.
