NEW!
Mower of canal slopes, roadsides "AMKODOR K-78M" -* with cutting device 33AP. K-78M.12.00.000.
The mower is designed for mowing grass and small shrubs (up to 20 mm) on the slopes of canals, dams, roadsides and median strips.
– It works on the basis of the Belarus (MTZ) tractor of traction class 1.4/2.
– Equipped with a manipulator with a working width of 1.6 m, providing service to hard-to-reach places.
"Thanks to the replaceable working tools, the mower can be used in the agricultural, reclamation, municipal and road construction industries.
– Working speed: 0, 5, 5, 0 km/h.
– Drive type: hydraulic from the tractor's PTO.
Overall dimensions of a mower without a tractor:
– in working position, mm, not more than: length 1050, width 7300, height 1600.
– Weight of the mower without a tractor, kg, not more than 970.
CUTTING DEVICE 33AP. K-78M.12.00.000
– Working body working width, m 1.6
– Maximum productivity, ha/h 1.9
– Number of rotors, pcs.3
Mowers are available (limited quantity)!.
Price/quality is excellent!
- Roll diameter 110cm.
- Roll width 120 cm
- Roll volume – 1.15 m³
- Hay bale weight – up to 200 kg
Differences from analogues:
- German take-up drum
- Rolling pins made of a circle (not pipe), Steel 45 Ø40mm
- A protective rubber cover is installed between the drum and the rear chamber, which eliminates the loss of fine harvested mass
- Pick-up wheels have a greater range of height adjustments.
- Bent tooth on the pick-up mechanism ensures clean harvesting of even thin-stemmed crops
- High-quality drive chains. All chains have the UNISIBMASH logo on them.
- Polymer painting shagreen - a coating resistant to fading and mechanical damage
- Single or double thread wrapping
- Two-strand wrapping reduces time by 25 seconds
- The pitched board rolls back the roll and saves another 20 seconds
- Grease holders on axles and bushings
- Tow bar for transporting rakes (press and rake with one tractor.
Unisibmash Plant
Specifications
Semi-trailer type
Capacity per hour of the main time depending on linear density, humidity and compression mass, operating mode, t/h, up to 9
Roll diameter, m 1.5
Roll length, m 1.4
Hay roll weight, kg 200-350
Roll weight on straw, kg 150-200
Pick-up working width, mm 1450
Wrapping material: twine
Transport speed, (km/h) not more than 25
The PR-150M baler is designed for picking up hay and straw rolls, pressing them into rolls of 300 kg with subsequent wrapping with twine.
Due to the use of a permanent closed-type baling chamber, the baler has low feed loss, the chain-slatted pressing mechanism ensures high reliability of the structure.
The towing device (snitsa) of the baler is located on the side, and has 2 positions, the transport one goes behind the tractor and the worker rides to the side of it. The tractor moves with the right wheel along the swath, this allows you to harvest hay and straw of high yields, improves the visibility of the pick-up mechanism. The harvested mass in the swath can be more than 1 meter high, grass is not wound around the propeller shaft of the tractor, does not rake it in front of it and does not cling to the tractor linkage. It also allows you to see foreign objects in the roll.
The PR-150M baler differs from similar balers in reinforced elements and assemblies due to the use of thicker metal on the pressing chamber and the frame of the machine, the welding seams are solid, which gives greater reliability during operation.
Distinctive features of balers manufactured by UNISIBMASH:
In front of the gearbox and on the pick-up mechanism there are friction safety clutches that protect the unit from overloads when foreign objects get into the pick-up mechanism or into the pressing chamber, preventing equipment breakdowns.
The wrapping device has an electric drive together with a mechanical one, the start is made from the control panel from the tractor cab or 2-3 pulls of the drive cable. When the adjusted pressing density is reached, a signal is sent to the control panel and the machine operator only needs to press the start button of the wrapping device.
The bale is pressed by a pressing mechanism with a reinforced chain with a pitch of 38.1 mm and rolling pins made of a circle of high-carbon steel (not from a pipe), and three rollers for pressing hay (2 from the bottom and 1 from the top).
Baler drive – drive sprockets, ratchet clutch and gearbox are located on the side, which is easy to maintain and reduces time, as well as the open pick-up has free access and allows you to easily replace the spring tooth if necessary.
During the opening of the baling chamber, the hay bale is rolled back with the help of slopes (pitched board) behind the trajectory of closing the rear chamber, and the tractor driver does not need to return each time when unloading the finished bale.
All drive chains mounted on baler drives are made of high-quality carbon steels, and have a long service life, even in harsh operating conditions.
Polymer painting of the baler gives it a smooth glossy coating that is resistant to fading and mechanical damage from grass and straw.
The warranty for the PR-150M round baler is 2 years from the date of commissioning.
Working speed, (km/h) not more than 9
Power consumption, hp 35
Pressing density, kg/m, (at moisture content 20-22%) on hay 120-200
Pressing density, kg/m, (at moisture content 20-22%) on straw, not less than 80
Tractor PTO speed, rpm 540
Col.
Mowing and chopping of annual and perennial sown and natural grasses with loading into a vehicle: feed dispenser or trailer (including attached to a mower-chopper);
Mowing, grinding and scattering crop residues of sunflower, corn, sorghum, potato tops and other crops over the field;
Selection of mowed grass from windrows with simultaneous chopping.
Item RF-152
Method of aggregation Trailed
Productivity (with a yield of 200 c/ha), t/h 16-20
Maximum transport speed, km/h 20
Maximum working speed, km/h 10
Maximum loading height, m 3.55
Working width, m 1.5
Cutting height is minimal, mm 30
Degree of grinding of green mass, %
particles up to 50 mm
up to 100 mm
over 100 mm 20-2540-50
40-25
Ground clearance, mm 150
Weight, kg 645
PTO speed, rpm 540
Required tractor power, hp From 65.
